lzx/videomancer-firmware
6
0
Fork 0
Code Issues Pull requests Projects Releases 97 Packages Wiki Activity Actions

97 releases 97 tags

RSS feed
  • videomancer/1.0.0-rc.55 227630556a

    videomancer/1.0.0-rc.55 Pre-release

    lars released this 2026-09-05 00:26:07 +00:00 | 0 commits to main since this release

    Release videomancer/1.0.0-rc.55 for VIDEOMANCER-FIRMWARE.

    InvenTree

    Created by LZX Actions tag_released automation.

    Downloads
  • videomancer/1.0.0-rc.54 227630556a

    videomancer/1.0.0-rc.54 Pre-release

    lars released this 2026-09-04 19:57:12 +00:00 | 0 commits to main since this release

    Release videomancer/1.0.0-rc.54 for VIDEOMANCER-FIRMWARE.

    InvenTree

    Created by LZX Actions tag_released automation.

    Downloads
  • connect/1.3.9 227630556a

    connect/1.3.9 Stable

    lars released this 2026-09-04 17:45:29 +00:00 | 0 commits to main since this release

    Release connect/1.3.9 for VIDEOMANCER-FIRMWARE.

    InvenTree

    Created by LZX Actions tag_released automation.

    Downloads
  • chromagnon/0.1.1 227630556a

    chromagnon/0.1.1 Stable

    lars released this 2026-09-04 16:56:59 +00:00 | 0 commits to main since this release

    Release chromagnon/0.1.1 for VIDEOMANCER-FIRMWARE.

    InvenTree

    Created by LZX Actions tag_released automation.

    Downloads
  • videomancer/1.0.0-rc.53 227630556a

    videomancer/1.0.0-rc.53 Pre-release

    lars released this 2026-09-03 22:43:13 +00:00 | 0 commits to main since this release

    Release videomancer/1.0.0-rc.53 for VIDEOMANCER-FIRMWARE.

    InvenTree

    Created by LZX Actions tag_released automation.

    Downloads
  • connect/1.3.8 227630556a

    connect/1.3.8 Stable

    lars released this 2026-09-03 21:16:14 +00:00 | 0 commits to main since this release

    Release connect/1.3.8 for VIDEOMANCER-FIRMWARE.

    InvenTree

    Created by LZX Actions tag_released automation.

    Downloads
  • chromagnon/0.1.0 227630556a

    chromagnon/0.1.0 Stable

    lars released this 2026-09-03 21:08:55 +00:00 | 0 commits to main since this release

    Published from monorepo via lzx firmware-publish (2026-09-03T21:09:23.359892+00:00)

    Downloads
  • videomancer/1.0.0-rc.52 7261fc6d7c

    videomancer/1.0.0-rc.52 Pre-release

    lars released this 2026-08-21 23:13:56 +00:00 | 4 commits to main since this release

    Published from monorepo via lzx firmware-publish (2026-08-21T23:13:55.610861+00:00)

    Downloads
  • videomancer/1.0.0-rc.50 7261fc6d7c

    videomancer/1.0.0-rc.50 Pre-release

    lars released this 2026-08-19 20:26:54 +00:00 | 4 commits to main since this release

    Videomancer 1.0.0-rc.50

    MCU-only fix for PAL/CVBS analog output dying after embedded program changes
    (Dual / Analog RGB 1V modular rigs). Follow-up to rc.49 — mirrors boot encoder
    lifecycle. Embedded vmprogs unchanged vs rc.48.

    Changes

    • Encoder reload window — ADV7393 RESET_N held and ADA4412 LPF disabled from
      program unload through post-upload VSYNC; PAL SDP configure deferred until stable
      FPGA sync (serial: analog=0 at load, analog=1 on first VSYNC).
    • Sync-health retry — Up to three VSYNC-gated ADV7393 configure attempts when
      H/V sync readback fails on SD composite.
    • Input pre-config — Decoder/receiver reconfigured before unload on program
      selection (boot/routing parity).

    Requires

    • Flash 1.0.0-rc.50 UF2 (MCU firmware only — same 27 embedded programs as rc.48).
    • Full UF2 flash recommended for units hitting CVBS blackout on program change.

    Beta testing focus

    Goals: lifecycle/beta/goals/1.0.0-rc.50.yaml.

    1. Composite program change (heavylight repro) — Dual In + RGB 1V + PAL +
      CVBS out; change embedded programs without power cycle (see
      qa/procedures/video_io/composite_program_change.md §1b).
    2. rc.49 regression smoke — HDMI and HD embedded paths unchanged (MCU-only release).

    Report feedback at /instruments/videomancer/beta or via Connect.

    Downloads
  • videomancer/1.0.0-rc.49 7261fc6d7c

    videomancer/1.0.0-rc.49 Pre-release

    lars released this 2026-08-19 17:13:08 +00:00 | 4 commits to main since this release

    Videomancer 1.0.0-rc.49

    MCU-only fix for PAL/CVBS analog output dying after embedded program changes
    (Dual / Analog RGB 1V modular rigs). Embedded vmprogs unchanged vs rc.48.

    Changes

    • Program-change CVBS recovery — VSYNC and vsync-watchdog handling during
      the Casting hold; post-upload ADV7393 force re-init when sync confirms before
      streaming; watchdog no longer unloads FPGA mid-load on Dual/Analog paths.
    • ADV7393 reset hold — 10 ms RESET_N pulse on every encoder configure
      (matches boot), fixing wedged sync slicer after FPGA CRESET.

    Requires

    • Flash 1.0.0-rc.49 UF2 (MCU firmware only — same 27 embedded programs as rc.48).
    • Full UF2 flash recommended for units hitting CVBS blackout on program change.

    Beta testing focus

    Goals: lifecycle/beta/goals/1.0.0-rc.49.yaml.

    1. Composite program change (heavylight repro) — Dual In + RGB 1V + PAL +
      CVBS out; change embedded programs without power cycle (see
      qa/procedures/video_io/composite_program_change.md §1b).
    2. rc.48 regression smoke — HDMI Colorbars CSC and HD embedded programs
      unchanged (MCU-only release).

    Report feedback at /instruments/videomancer/beta or via Connect.

    Downloads